User Manual
2
A hard reset clears memory, deletes all
data (such as owner information under
Setup Wizard and AutoCongurator) and
restores the Apollo to its default settings. The
action will erase all data that you have
created and programs you have installed, but
will keep all the preinstalled programs that
were in the phone when your Apollo was rst
delivered to you. Press and hold the power
button, and then use the stylus to press the
soft reset button at the same time. Be sure
you have backed up all your data in a Mini
SD card or on your PC before performing a
hard reset.
2.12 Power management
To reduce the power consumption of your
Apollo, you may change the backlight
duration and brightness level. Also, you can
save more power by setting the phone to turn
off automatically if not in use
for a specic period of time.
To check battery power level:
Tap Start > Settings > System tab >
Power > Battery tab. A bar indicates the
remaining battery power level.
To turn off the device automatically:
Tap Start > Settings > System tab >
Power > Advanced and select the duration
before your Apollo turns off by itself. This
feature controls the screen standby time.
To reduce the brightness level:
Tap Start > Settings > System tab >
Backlight > Brightness tab and adjust the
brightness level from 1 to 10 (darkest to
brightest).
To adjust the backlight duration:
Tap Start > Settings > System tab >
Backlight > Battery Power or AC Power
tab to select backlight duration and condition
for backlight on/off under either battery or AC
power supply.
36