User Manual

1. Tap Start > Settings > Connections tab.
2. Tap Bluetooth > Devices tab > New
Partnership. Your device searches for
other Bluetooth devices and displays
them in the list.
3. Tap the name of the other device in
the list and then Next.
4. In PIN, enter a PIN of 1 to 16
characters and tap Next.
5. Enter the same PIN on the other device.
6. If necessary, in Name, edit the name
of the other device.
7. Tap Finish.
Please note
Make sure that the two devices are
within 10 meters of one another and
that the Bluetooth is in discoverable
mode on both devices.
To accept a Bond:
1. Make sure that the Bluetooth is turned
on and in discoverable mode.
2. When prompted to bond with the
other device, tap OK.
3. In PIN, enter a PIN of between 1 and 16
characters, and tap Next. You must enter
the same PIN that was entered on the
device requesting the bond.
4. If you want, in Name, edit the name
of the device requesting the bond.
5. Tap Finish.
The bond is created. You can now exchange
information with the other device.
To rename a Bond:
1. Tap Start > Settings > Connections tab.
2. Tap Bluetooth > Devices tab.
3. Tap the bond to rename.
4. In Name, enter a new name for the bond.
5. Tap Finish.
To delete a Bond:
4
1. Tap Start > Settings > Connections tab.
2. Tap Bluetooth > Devices tab.
3. Tap and hold the bond to delete.
4. Tap Delete.
Beaming Information with Bluetooth:
1. Tap and hold an item to beam, such as
an appointment in Calendar, a task in
Tasks, a contact card in Contacts, or a
le in File Manager.
2. Tap Beam [type of item].
3. Tap the device that you want to send
the beam. The item is beamed to the
device you selected.
If the device that you want to beam to does
not appear on the list, make sure that it is
turned on, in discoverable mode, and within
10 meters of your device. Also, make sure
that your Bluetooth is turned on.
49