User Manual

8. Select the recognized USB Modem in
the Models list and then Next. After
installation is completed, select Finish.
9. After the installation, a new USB modem
will be found in the Modem list by tapping
Start > Settings > Control Panel >
Phone and Modem options on your PC.
10.Double click the USBModem_Dialer le
on the Companion CD and set the GPRS
settings (enter the APN assigned by your
ISP) in the blank text box and press Dial
to start the connection.
Connect via Bluetooth
Before starting to use your Apollo as a
Bluetooth modem, you must be sure that
your PC is a Bluetooth-enabled device. In
addition, you need to check the following:
• Make sure that a GPRS enabled SIM
card is inserted in your Apollo.
• Disable the ActiveSync BT
port connection of your PC.
• Disable the Infrared function by
tapping the Start menu > Settings >
the Connections tab > Beam. Uncheck
Receive all incoming beams.
1. To begin, select the Start menu >
Programs > Wireless Modem.
2. Select the Bluetooth connection type
from the drop-down list, and tap the Start
button.
3. Open your Apollo from the Bluetooth
application installed on your PC.
The interface of the Bluetooth application
installed on your PC will vary, depending on
the Bluetooth module that was embedded in
or attached to your PC when you purchased
it. Follow the installation instructions given in
the connected Bluetooth device’s manual.
VPN
The VPN is the network that allows
4
authorized users to access and transmit
data.
To create a VPN connection:
1. Tap Start > Settings > the Connections
tab > Connections and select Add a
new VPN server connection.
2. Enter the VPN server IP and tap Next.
3. Select the way to authenticate
IPSec/ L2TP connections and tap
Next.
4. Enter My VPN details and tap the
Advanced tab to continue setup or Finish
to exit.
USB cable
To access the Internet, you may connect
your device to a PC via a USB cable. Make
sure that the PC is connected to the Internet.
59