User's Manual

z Battery empty
z Battery charging
2.3.3 Low battery indication
When the battery voltage falls below the working level, a warning message
appears on the screen and a warning tone sounds to alert you if you activate the
warning sounds for system events (Please see Sounds & Notification). Save the
data you are working on at the moment, perform synchronization with your PC,
and turn off your Pocket PC Phone. For more details about data safety, please
see the following “Data Backup” section).
2.4 Switching the phone on or off
z Press the Power button on the top of the phone to switch on your phone.
When you switch on the phone for the first time, your phone will power up and
automatically begin the initiation/calibration process. See “Screen tapping &
calibration” for further details.
z To switch off your phone, press the Power button again.
Please note
Switching off your phone suspends the screen display and the phone enters sleep
mode to save battery power. When your phone is in sleep mode, press the Power
button to wake up the phone; the phone will then display the Today screen.
2.5 Screen taping & calibration
When you first start up your Pocket PC phone, you will be asked to calibrate the
screen by tapping the centre of a cross with your stylus as it moves around the
screen. This process ensures that, when you tap the screen with your stylus, the
tapped item is activated.
2.5.1 Re-calibrate the screen
If your Pocket PC Phone does not respond accurately to screen taps, you will
need to re-calibrate it:
1. Tap Start
> Settings > System tab > Screen.
2. Tap the Align Screen button on the General tab to re-calibrate the screen as
described above.
Please note:
When aligning the touch screen, tap the target firmly and accurately.
2.6 Screen Orientation
To switch the orientation of your touch screen between the Portrait mode and the
刪除: WF