User's Manual

To turn on the infrared connection:
Tap WF> Settings > the Connections tab > Beam and confirm to receive all
incoming beams. Please make sure there is no obstacle between the devices in
order to prevent interference.
Once you activate the feature to receive all incoming beams, your phone detects
all incoming infrared (IR) beams and prompts your phone to accept them. If you
do not wish your phone to detect or receive beams, clear the Receive all
incoming beams check box.
Warning:
Do not expose your eyes directly to the IR infrared beam or allow it to interfere
with other IR devices.
To synchronize via IR connection:
1. To receive infrared beams, follow the instructions in ActiveSync Help on the
PC to set up your PC.
2. Line up the infrared (IR) ports according to the instructions in the
manufacturer's documentation for your device so that they are unobstructed
and within close range.
3. On the device, tap WF> Programs > ActiveSync.
4. Tap the Menu tab> Connect via IR.
5. Tap Sync.
3.3.3 Bluetooth connection
Your phone is designed with Bluetooth wireless connectivity technology, which
allows your phone to connect to a Bluetooth-compatible device within 10 meters.
For best connection results, it is suggested that you connect the device to the PC
using USB to establish a synchronization relationship before connecting via
Bluetooth.
To turn on the infrared connection:
Tap WF> Settings > the Connection tab > Beam and confirm to receive all
incoming beams. Please make sure there is no obstacle between the devices to
prevent interference.