User's Manual

4. Getting connected
Your Pocket PC Phone has powerful networking functions that enable you to
connect to the Internet using a number of different methods, for example, GPRS
network or a Bluetooth modem. You can also use an external modem with this
device to access the Internet.
You can set up connections to the Internet and to a corporate network at work to
browse the Internet, send and receive E-mail, use instant messages, and
synchronize with ActiveSync.
There are two types of connection settings: My ISP and My Work Network. My
ISP settings are used to connect to the Internet, and My Work Network settings
can be used to connect to any private network, such as a corporate network. Fill in
the settings and you are ready to connect to the Internet.
4.1 Making a Connection
You can connect your Pocket PC Pone to the Internet or an Intranet in the
following ways:
4.1.1 CSD Line Type
This program allows you to choose the line type when you make a circuit switch
data connection.
To change a CSD Line type:
1. Tap the WF > Settings > Connections > CSD Line Type.
2. Define the value for Data Rate. In Connection element, choose a type from
that drop-down menu. Tap OK.
Please note:
The default setting on your Pocket PC Phone is set for optimal use. Do not
change this setting unless you have trouble using the circuit switch data
connection.