User's Manual

Using a Bluetooth Phone as a Modem
You can use a phone that has Bluetooth capabilities as a modem for your device.
To do this, you create a Bluetooth modem connection on your device and then
send information to the phone by using Bluetooth. The phone relays the
information over the phone line and then sends back to your device any
information that you had requested over the connection.
Once you create a modem connection to the Bluetooth phone, you can reuse it
whenever you want to use the phone as a modem.
1. Make sure that the Bluetooth phone is turned on, that your device’s and the
phone’s Bluetooth radios are turned on, and that your device and the phone
are within 10 meters (10 meters) of one another.
2. If you have not already done so, create a Bluetooth phone connection using
the method described below:
3. Tap WF > Settings > Connections tab > Connections > Add a new modem
connection.
5. Enter a name for the connection.
6. In the Select a modem list, tap Bluetooth > Next.
7. Make sure that the phone is discoverable. Some phones may also need to be
pairable in order to accept a bonding request.
8. If the phone appears in the My Connections list, skip to step 14. If not, tap
New and follow the remaining steps.
9. In the list, tap the phone and then Next.
10. In PIN, enter a PIN of between 1 and 16 characters, and tap Next.
11. Enter the same PIN on the phone.
12. If you want, in Name, edit the name of the phone.
13. Tap Finish.
14. In the My Connections list, tap the phone, and then Next.
15. Enter the phone number to dial for this connection and tap Next.
16. In User name, Password, and Domain, enter the logon information for this
connection and tap Finish.
17. Start using the program that uses the Bluetooth phone connection; for
example Inbox to send and receive e-mail, or Internet Explorer to browse the
Web.