User's Manual

4.1.6 Modem Link
This utility will enable your device to simulate a wireless modem, and allow your
PC/Notebook be connected to a wireless network. Before creating a new modem
via the selected connection type, you still need to install the drivers on your
PC/Notebook. For more details about the drivers installation and the minimum
requirements of your PC/Notebook, please refer to the companion CD.
1. Tap WF > Programs > Modem link.
2. Select a connection type.
3. Connect your device via infrared to a notebook PC or desktop PC, and then
tap Start.
Please note:
Before you press the Start button, please make sure that your device has a
GPRS SIM card installed, and that you have connected this device to your
PC/Notebook by IrDA connection and disabled the ActiveSync.
4.1.6.1 Settings on your PC
Contact your ISP to get the APN (Access Point Name). Before you start using
your Wireless Modem with an IrDA connection, you need to create a new modem
on your PC first:
1. Click WF > Settings > Control Panel > Phone and Modem Options.
2. Add a new modem by selecting the Modem tab.
3. Enable the checkbox: Do not detect my modem; I will select it from a
list.
4. Select Standard Modem Types in the Manufacturers field, select
Standard 33600 bps Modem, then select Next.
5. Select your modem port and click Next.
6. When a Modem installation is finished! screen appears, click Finish to
go back to the Modem tab mentioned in Step 2. Now you can see a
Standard 33600 bps Modem in the modem list.
7. Highlight the modem you just created, click the Properties button, and
select the Advanced tab.
8. Enter the complete string in the Extra initialization commands: field:
AT+CGDCONT=1,"IP","APN","",0,0
.
9. Remember to click the Change Default Preferences button after
entering the required string as mentioned above.
10. Click the General tab and set the Float control by selecting None from
the drop-down list. Keep pressing OK until the modem installation wizard
exits.