User's Manual

A new standard modem is now set up successfully on your PC, but you still need
to create a new dial-up connection:
1. Click Start > Settings > Control Panel > Network and Dial-up
Connections > Make New Connection.
2. To continue, tap Next.
3. Select Dial-up to the Internet. Tap Next.
4. Enable the option I want to set up my Internet connection manually, or
I want to connect through a local area network (LAN) button, and
Next.
5. Select I connect through a phone line and a modem option, and then
Next.
6. Enable the Use area code and dialing rules checkbox and enter the
telephone number *99#, and then Next.
7. Enter the username and password you use to log on to your ISP, and then
click Next.
8. Enter a name for this connection, and then Next.
9. Select No when the installation wizard asks you to set up an Internet mail
account, and then click Next.
10. After the installation is completed, click Finish.
4.1.6.2 Connecting via USB Port
As with connection via IrDA, you need to check the following before you start
using the Wireless Modem on your Pocket PC Phone via USB connection:
z Make sure that a GPRS enabled SIM card is inserted in your Pocket PC
Phone.
z Disable the ActiveSync com port connection of your PC.
z Disable the Infrared function by tapping the Start menu > Settings > the
Connections tab > Beam, and then uncheck Receive all incoming beams.
z Connect your Pocket PC Phone to your PC USB connection (using the USB
sync cable or cradle).