User's Manual

Before setting up a USB modem, you must verify that you have the two files,
USBMDM and USBModem_Dialer on the Companion CD. Insert the Companion
CD into the CD-Rom of your PC and perform the settings as follows:
1. Tap the Start menu > Programs > Wireless Modem.
2. Select the USB connection type from the drop-down list and insert the
USB cable adapter.
3. Tap the Start button on the Wireless Modem screen of your Pocket PC
Phone.
4. A Found New Hardware message will pop up on your desktop PC.
5. Select the Display a list of the known drivers for this device so that I
can choose a specific driver option, and then click Next.
6. Select Modem from the Hardware types list, and then Next.
7. Click the Have Disk button, and then Next.
8. Select the recognized USB Modem in the Models list, and then Next.
After the installation is completed, select Finish.
9. After the installation, a new USB modem will be found in the Modem list
by tapping Start > Settings > Control Panel > Phone and Modem
Options on your PC.
10. Double click the USBModem_Dialer file on the Companion CD and set
the GPRS settings (enter the APN assigned by your ISP) in the blank text
box and press Dial to start the connection.
4.1.6.3 Connect via Bluetooth
Before starting to use your Pocket PC Phone as a Bluetooth modem, you must be
sure that your PC is a Bluetooth-enabled device. In addition, you still need to
check the following:
z Make sure that a GPRS enabled SIM card is inserted in your Pocket PC
Phone.
z Disable the ActiveSync BT port connection of your PC.
z Disable the Infrared function by tapping the Start menu > Settings > the
Connections tab > Beam. Uncheck Receive all incoming beams.
1. To begin, select the Start menu > Programs > Wireless Modem.
2. Select the Bluetooth connection type from the drop-down list, and tap the Start
button.
3. Open your Pocket PC Phone from the Bluetooth application installed on your
PC.
The interface of the Bluetooth application installed on your PC will vary,
depending on the Bluetooth module that was embedded in or attached to your PC
when you purchased it. Follow the installation instructions given in the connected