User's Manual

68
Chapter 6. Upgrading and replacing devices
7 Take out the hard disk drive secured in a metal frame.
8 Remove the screws and detach the metal frame from the hard disk
drive.
9 Attach the metal frame to a new hard disk drive; then tighten the
screws.
0 Put the hard disk drive gently into the hard disk drive bay with the tab
facing upwards and the connectors facing each other; then push it
firmly into space.
A Reinstall the frame fixing screw.
B Reinstall the compartment cover.
C Reinstall the screws.
e
S10-3t UserGuide V1.0_en.book Page 68 Friday, October 23, 2009 12:57 PM