User's Manual

QUANTA COMPUTER INC. Wireless Home Health Management System
____________________________________________________________________________
___________________________________________________________________________
User Manual V1.0 Page: 18
2. Create New Case
Clicking "New Case" will display the following window:
Create a New Case as follows:
a. Click "New Case" to display the following window.
Confirm the subject in the Subject field. Enter the Resting HR of the Subject
and click "OK".
b. Ensure Bluetooth has been properly connected to the Serial Port of the
hardware.
c. Click "Open" to open the Com Port as shown in the diagram below.
If correctly launched, the Status will change to Connected as shown in the
diagram below. To close the Com Port, click "Close". If during the
measurement process, the Com Port connection disconnects due to instability,
the system will close the Com Port automatically.
d. Click "Start" on the left of the screen to connect to the hardware, send out the
initializing data and prepare to receive the test data.
e. To end the test, click "Stop" on the right of the screen. Upon clicking "Stop",
the data automatically save to the database.