User's Manual

Wearing the ECG Sensor
Depending on the model you have purchased you may either wear the ECG sensor
using the provided body strap, or wear the ECG sensor directly on your body.
IMPORTANT: When wearing the ECG sensor directly you must use separately purchased
electrodes for the device to work properly. For more information on electrode specifications see
ECG Electrode Information.
IMPORTANT: When wearing the ECG sensor either directly or with the body strap, ensure that
the contacts on the electrodes or the strap are in direct contact with your skin and that the
contact area on the skin is sufficiently clean and dry. You may wipe the skin clean with a wet
towel or alcohol swab and allow it to dry to before wearing the ECG sensor.
IMPORTANT: If the skin at the contact point shows signs of rash/blisters/reddening or other
discomfort, please contact a medical professional or physician.
Wearing the ECG Sensor with the Body Strap B1
To wear the ECG sensor using the body strap B1 follow the directions below:
1. Open up the front pocket of the body strap.
2. Attach the patch to the front of the body strap so that the left sensor side of the patch
attaches to the connector on the strap next to the ring loop (see image below).
3. Attach the ECG sensor to the front of the patch so that all four patch connectors on
the sensor are properly clicked into the four sensor connectors on the patch (see
image below).