User's Manual

NOTE: Once connected, the status indicator on the sensor will light green then slowly flash indicating
that the sensor is connected to the patch, but that the patch has not properly made contact with a
body.
4. Fold over and adhere the Velcro tabs to close the front pocket of the body strap.
5. Wrap the body strap around your torso and tighten it so that it fits firmly around
middle of your torso.
6. Adjust the positioning of the strap so that the pocket is slightly under your pectoral
area and the midpoint between the first and second contact on the strap aligns with
the middle of the rib cage (see image below).
7. Once the ECG sensor is properly worn on your body the Q-COR app will start
showing an ECG reading.
Wearing the ECG Sensor with the Body Strap B2
To wear the ECG sensor using the body strap B2 follow the directions below:
1. Attach the ECG sensor to the front of the body strap so that all four patch connectors
on the sensor are properly clicked into the four sensor connectors on the body strap
(see image below).
NOTE: Once connected, the status indicator on the sensor will light green then slowly flash indicating
that the sensor is connected to the patch, but that the patch has not properly made contact with a
body.
Ring
Loop
Sensor
Side