User's Manual

2. Wrap the body strap around your torso and then clip the strap clip to the front of the
strap (see image below). Tighten the body strap so that it fits firmly around middle of
your torso.
3. Adjust the positioning of the strap so that the pocket is slightly under your pectoral
area and the second contact on the strap aligns with the middle of the rib cage (see
image below).
4. Once the ECG sensor is properly worn on your body the Q-COR app will start
showing an ECG reading.
Direct Wear
To directly wear the ECG sensor on your body follow the directions below:
1. Attach an ECG electrode to each of the 3 connectors on the back of the patch (see
image below).
NOTE: For more information on electrode specifications, see ECG Electrode Information.
2. Attach the ECG sensor to the front of the patch so that all four patch connectors on
the sensor are properly clicked into the four sensor connectors on the patch (see
image below).