User's Manual

NOTE: Once connected, the status indicator on the sensor will light green then slowly flash indicating
that the sensor is connected to the patch but that the patch has not properly made contact with a
body.
3. Unpeel the paper strips on the contact side of each of the ECG electrodes.
4. Adhere the 2 electrodes attached to the sensor side of the patch to under your left
pectoral area (see image below).
NOTE: The electrodes feature adhesive on the contact side to ensure that they adhere to your body,
if an electrode does not properly adhere please replace the electrode with a new one.
5. Adhere the electrode attached to the cable side of the patch to the area slightly
under your right collarbone (see image below).
6. Once the ECG sensor is properly worn on your body the Q-COR app will start
showing an ECG.
IMPORTANT: When directly wearing the ECG sensor, ensure that all 3 electrodes are firmly
adhered to your body and that neither parts of the patch are left dangling, as seen in the image
below, which may lead to damage or short-circuit if contact is made with another power