User's Manual

-4-

Getting Started

This chapter describes the instructions that guide you through the proper installation of your 11Mbps

MiniUSB Wireless Adapter for the Windows XP/2000/ME/98 operating systems.

The complete installation of the 11Mbps MiniUSB Wireless Adapter consists of the following steps:

STEP 1

: Install the corresponding driver and utility.

STEP 2

: Set basic settings.

STEP 34

: Finish Installation.

2-1 Before Installation

In addition to the items shipped with the client adapter, you will also need the following in order to

install the adapter:

1. Because the MiniUSB Wireless Adapter is built into your notebook/laptop, you may directly

proceed to the driver installation for your MiniUSB Wireless Adapter.

2. A computer equipped with a Type II or Type III USB slot, and a USB card and socket services

compliant with revision 2.10 of the USB specification (or higher).

3. Windows XP/2000/98/ME (with a Windows installation CD-ROM, diskettes for use during

installation)

4. Minimum 500 Kbytes free disk space for installing driver and utility program.