User's Manual

-24-

Create Encryption Keys Manually

You can also create encryption keys manually by clicking the

Create Keys Manually

check

box.

For 64bit encryption you may choose:

n Alphanumeric

: 5 characters

(case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g.

MyKey)

n Hexadecimal

10 hexadecimal digits

in the range of “A -F”, “a-f” and “0-9” (e.g.

11AA22BB33)

For 128bit encryption you may choose:

n Alphanumeric

: 13 characters

(case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g.

MyKey12345678)

n Hexadecimal

: 26

hexadecimal digits

in the range of “A -F”, “a-f” and “0-9” (e.g.

00112233445566778899AABBCC)

After entering the WEP keys in the key field, select one key as active key, click the

button and

then click the

Apply

button on the

Configuration

tab to make the setting take effect.

Create Encryption Keys Manually – Hexadecimal (64bit)

Note:

The WEP key must be set up exactly the same on the Wireless LAN stations as

they are on the wireless Access Points. If you set “MyKey” for the Wireless LAN

CF Card, the same WEP Key “MyKey” must be assigned to the Access Point or other

stations.