User's Manual

-28-
Loop Back:
The
Loop Back
tool helps you examine data transmission quality between your 11Mbps MiniUSB
Wireless Adapter and any workstation on the network. By entering IP address of 2 remote station,
setting ping interval and packet size, you may know whether communication has been made
successfully or not. Additionally, you may run the loopback test (proprietary) by clicking the
Loop
back
button to verify the communication quality
between your wireless station and Access Point.
The
Refresh
button is used for setting the counters back to 0.
AP Browser
:
By clicking the
Rescan
button, the AP Browser can display Access Points around the working
environment. Besides showing the ESSID of each Access Point, it also displays BSSID, Channel,
Signal, Quality and Supported Rates. To join any of the displayed Access Points, highlight the
Access Point you desire to connect and then click the
Join BSS
(when there are more than 2 Access
Points with the same ESSID), or
Join ESS
button to join the group.