GKRN 3G Module User Manual
I. Safety Important Notice Due to the transmission and reception properties of cellular communications, data can occasionally be lost or delayed. This can be due to the variation in radio signal strength that results from changes in the characteristics of the radio transmission path. Although data loss is rare, the environment where you operate the PCI module may adversely affect communications. Variations in radio signal strength are referred to as fading.
- cause an explosion or fire resulting in bodily injury or even death. Be aware and comply with all signs and instructions. Users are advised not to operate the PCI module while at a refueling point or service station. Users are reminded to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.
- Areas with a potentially explosive atmosphere are often but not always clearly marked. Potential locations can include gas stations, below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Near Medical and life support equipment.
II. Legal Information FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
RF Exposure Information This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
1. Introduction Thank you for purchasing the GKRN HSUPA 3G Module, this Module is designed to be used to connect a laptop computer/PC/Router to a cellular phone network. 2. Product Overview 2.1. Key features Support HSUPA/HSDPA/UMTS(WCDMA)/GPRS/GSM. OS: Windows XP/Vista /Linux Eee PC/ Mac 10.4 10.5. Support GSM circuit-switched (CSD) data transfer. 2.2. Specifications 2.2.1.
2.2.2. Software Specifications Item Data Service Description GSM CS： UL 9.6kbps/DL 9.6kbps GPRS： UL 26.8kbps/DL 53.6kbps EDGE： UL 118.4kbps/DL 236.8kbps UMTS CS： UL 64kbps/DL 64kbps UMTS PS： UL 384kbps/DL 384kbps UL HSUPA/DL HSDPA： UL 5.76Mbps/DL 7.2Mbps Short Message Service SMS send and receive Phonebook Depends on SIM card specification, support Max 500 records SIM edit Software Installation Plug and Play immediately Save and retrieve SMS on/from SIM 2.2.3.
Items Profile Setting Descriptions Default Profile Setting, User defined profile setting up to 10 records Automatic connection setting configured depends on Default Operator Profile Setting SMS SMS Edit, Add, Delete, Reply, Forward SMS Send/Receive: single page SMS up to 160 bytes characters or 70 Chinese words Concatenate SMS：Concatenate SMS content limitation is 1530 bytes or 670 characters and Chinese intermixed words or 10 pages Group Message: allows one SMS to be sent to 25 contacts simultaneously.
Items Descriptions limitation.
Items Descriptions Overall connection session data statistics, including overall connection Time, overall Transfer/Receive Volume Other mode Network connection setting: Default Settings/User Defined Settings Network usage status shown: RSSI indication, Operator name, Network Service status Band Selection: Automatic/ 3G only / 2G only Quick Startup Enable/Disable LED control Call settings(None, Send busy tone, Call forward) PIN Management: PIN1/PIN2 enable/disable/modification, Unlock PUK1/PUK2 11
