3.
Contents 1. Overview 1 2. First time connection 1 3.
PS: Icon list: 1. Overview Thank you for purchasing the 3.5 G HSPA Data Card. This Data Name Graphic Description Card is designed to be used to connect a computer to a cellular phone network. GSM GPRS 2. First time connection 1. Make sure you have Inserted SIM card into SIM slot . 2. Turn the 3G module switch on. 3. Launch Connection Manager application. WCDMA Displayed when the service is available EDGE HSDPA 4.
(Auto Network detection and connection function is only applicable to built-in mobile networks.) You can connect to internet using the new profile by pressing the Set as Default profile button and then press the Connect button. Create a Profile To end the connection, press the Connect button again to The program has already built in the connection profiles. If you disconnect. w (After you have press the Set as Default button, the program will 1. Select Profile Type and click Next.
Establishing and Ending a connection 4. Click Send to send the message. Forwarding a text 1. Tap the Connect button to connect to the network using the new profile. 2. Tap the Disconnect button to end the connection. Text messaging (SMS) The Data Card can be used to perform all the text messaging functions that can be done on a mobile phone, ex: sending, receiving, replying, forwarding and deleting. Writing/Sending a text 3. 4. Click the SMS button. Click New. 5. 1. Click the SMS button. 2.
Editing Contacts Exporting vCards from Contacts 1. Click the Contacts button. 1. Click the Contacts button . 2. Select the contact to edit. 2. Click the Export button. 3. Click the Edit button. 4. Modify the contacts details. 5. Click OK to save the changes. Deleting individual Contacts 3. Select the destination to save the vCard(s). 4. Click OK to export the card(s). 5. After the export, a message will be displayed. Click OK to close. 1. Click the Contacts button.
Usage (3G/GPRS) 1. 3. 2. Select the Usage tab. 3. Check the Limit by Data checkbox. 4. Enter the desired value between 100MB and 10000MB. 5. Click Apply to save the settings. Please note this function needs your confirmation to redial on Windows Vista. Select View > Preference. 3. Specifications Bands Time (Dialup) UMTS/ GPRS Dual Mode (UMTS triple bands & GPRS 850/900/1800/1900 MHz) 1. Select View > Preference. 2. Select the Usage tab. Transmission Speed Up to 3.6 Mbps HSDPA 3.
FCC Regulations: lThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. lThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
