User Manual

7
Getting Started
Getting Started
For all the features to work, you must have a valid SIM card (included in the package supplied
by your service provider) that also supports these features.
Even if you have a fully featured SIM card, any feature not supported by the network
transmitting your call will not work. This last point is especially important when you are roaming
among networks.
Before you attempt to use your phone, check if you have:
• A valid SIM card inserted in the phone
• Fully charged battery
, Before you use your new phone, the service must be activated by your service
provider. Please contact your local service provider regarding phone activation.
2 At start-up, you may be prompted to enter your PIN code or phonecode. For details, see p.26 “Security” .
SIM card
Before using your phone, you must sign-up/register with a wireless network service provider to
receive a personal SIM (Subscriber Identity Module). The SIM card contains a computer chip
that keeps track of your phone number, the services included in your subscription, and your
SIM phonebook information. It is stored in a recess in the battery compartment.
The phone is unusable (except for emergency calls) until a valid SIM card is inserted. It is
possible to transfer your SIM card to another compatible phone and access your network
services. Your phone will display a warning message if the SIM card is not inserted properly.
, If the phone or the SIM card is lost or stolen, you should contact your service
provider immediately in order to prevent unauthorized use.
2 The digital technology of your phone helps to ensure that your conversations are kept secure.
2 The SIM card contains personal data such as your electronic phonebook, messages, as well as details
of the network services you have subscribed to. The phone will not work (except for emergency calls
on some networks) unless a valid SIM is inserted.
Inserting a SIM card
, Be sure to turn the phone off before inserting and removing a SIM card. Otherwise,
damage to the SIM card can occur.
, Be careful not to pinch your fingertip between the cover lock and the cover.
☛ STEP1: While pressing the cover lock on the back of the phone in the direction of arrow
➀, push the bottom of the phone in the direction of arrow ➁ without pressing both sides
of the cover too hard.
☛ STEP2: Slide the cover until it is completely removed.
☛ STEP3: Lift the finger tab of the battery in the direction of arrow ➂ to remove the
battery.
☛ STEP4: While pressing down on the holder with your finger, slide it in the direction of
arrow ➃ until it clicks to unlock.