User's Manual

148
1 Discover devices at start up
Sets how many seconds to search for other devices when Pocket Plugfree is
started. Tap to select it , then input the number of seconds into “Devices to
search for”.
2 When they are outside the communications range, devices with the “Bonded”
or “Always display” property are displayed grayed out.
When
is tapped and other devices searched for again, if a device for which
“Bonded” or “Always display” is set with the Properties is not in the Bluetooth
TM
communications range, the icon for that device is grayed out and “×” is displayed.
3 Can other devices reference this device?
This sets whether or not this device can be seen from other devices. Tap “Yes”,
“No”, or “60 seconds” to select it
. When you tap “Start”, the selected status is
enabled.
“Object” tab
Normally, there is no need to make the settings on this screen. When making these
settings, see the help.
"Discovery" tab
This sets such parameters as the interval at which to search for other Bluetooth
TM
devices and whether or not this device can be seen from other devices.
1
2
3
Section 07 LOOX (141-151) 6/25/02, 10:06 AM148