User's Manual

1 Notice Concerning Usage

Please watch out for the following, which can cause malfunction and accidents.

 Handling Precautions

• Do not subject this device to mechanical shock or vibration.

• Do not disassemble this device.

• If this device is used a prolonged periods of time, the temperature of the surface of this device

rises and becomes hot when you touch. This is because heat radiates from the device as a

whole once the temperature within the device reaches a certain level. It does not signal

breakdown of the device.

 Locations to Avoid for Usage and Storage

Avoid using this device in locations such as the following.

• Locations with extremely high or low temperatures

Operating temperatures of this device is 0 ~ 40°C and storage temperatures is –25 ~ 60°C

• Locations subject to direct sunlight

• Locations subject to mechanical shock or vibration

• Excessively dusty locations

• Locations where water or any other liquid might get on this device

• Locations with high humidity

• Locations where Bluetooth

signals could be harmful (hospitals, within aircraft, in crowded

trains, etc.)

 How to Stop the Bluetooth

Functions

In locations such as hospitals, aircraft, and crowded trains, where Bluetooth

signals

could be harmful, either switch Off the power for this device and stop using it or use this

device with its Bluetooth

functions stopped.

To stop the Bluetooth

functions of this device, slide the Bluetooth

switch on the right

side of the device as shown in the following figure to the Off side.

SECTION 1

Section 01 LOOX (01-09) 6/25/02, 9:56 AM2