User's Manual

184
SECTION 9
4 Connection Related Troubles
This section covers troubles related to connections.
 Q: Infrared communications do not work
A Check the following points
Check the installation position and ambient environment according to the instructions in
“Securing Good Communications”.
 Bluetooth
TM
communications do not work
A Check the following points
• Check the installation position and ambient environment according to the instructions in
“Securing Good Communications”.
• Check that the Bluetooth
TM
switch is at the On side.
• Check that the power for the other Bluetooth
TM
device is On and that the Bluetooth
TM
communications software settings are correct.
 Can not connect to the Internet
A Check the following points
• Check that the modem type and communications speed match your CF card.
• Check that the server addresses etc. match the information from your provider.
• Check that the telephone number matches the access point for your provider.
• Check that the Sender is set to “CF” and that the line type is set to “Tone”.
• Check that the CF card is set properly in place.
• Check that the signal is good.
Section 09 LOOX (179-186) 6/25/02, 10:09 AM184