User's Manual Part 3

Wireless LAN

User manual Wireless LAN 11 Mbps

Troubleshooting

(Continued)

In Windows 2000:

1. Check the Windows 2000 Diagnostics. See if there is any conflict in the resource allocation or

the I/O Address, IRQ allocations. If you find that the IRQ or I/O Addresses are already assigned

to some other devices, you must change that value. I/O Address needs 40h byte length.

2. Go to the Control panel. Double click on the PCMCIA Card and you will see WLAN Adapter.

Double clicking on that will show you the Card Information, driver name and the driver file. You

must confirm the name of the driver and the driver file as "prismnic.inf" and "prismnds.sys". If

you do not find the names listed above, there are some problems and the driver is not installed

properly. Reinstall the driver.

Note: Check the PnP BIOS setup menu and select no in case of the WLAN Adapter installation.