User's Manual

Connections| 43
XenAppView
There are three fields required to set your XenAppView connection up:
 Server Address- This field requires the IP address of your XenServer.
 Username - Enter the username that has permission use a XenAppView
connection in this field.
 Group - Enter the domain name associated with your username. For
example, /ACCOUNTING or yourcompanyname.com
 Autostart- Enable this checkbox to automatically launch this session after
the thin client completes its boot procedure.
 Auto Restart- Select Yes or Prompt to automatically restart the
connection.
 Yes-Once the session is terminated, the session will automatically restart.
There is no way for the user to stop it from occurring.
 Prompt-Once the session is terminated, the user will receive a YES/NO
prompt asking them if they wish to reconnect to the session.