User's Manual

d. On your very first connection to a hub, a “Wireless

Network Properties” window will appear. A basic

connection to a simple network hub is shown in the

example to the right – most of the information will

already be populated when this screen displays.

Also note the boxes that are checked and those that

are not checked. Press OK.

You will be returned to the original “SDIO86861”

Window and the tablet will attempt to connect to the

wireless hub automatically.

Note: The wireless environment you are accessing

maybe be part of a corporate or public network –

these networks may have certain characteristics that

require further configuration such as an Encryption

method (e.g. WEP), a “Network key” or IEEE 802.1

authentication. If so, contact the network

administrator for further assistance.

e. At the “SDIO86861” Window, the device will

attempt to connect to the wireless hub. The

status of the connection attempt will display

next to the “Status” label. If your connection is

successful, it will display “Connected to

<name of hub>”. The “Signal Strength” label

will indicate the strength of the signal – Low,

Very Good, Excellent. Also notice the

“Connected Icon” next to the “United” label in

the center box. If the signal is low or you have

intermittent connection problems, you may

have to move closer to the wireless hub..

Note: The message to the right is just a warning

message you may get while you are attempting to

connect to a wireless hub. No action is necessary

other than to tap the OK button.