User's Manual

6
2 Getting Started
These steps describe how to power-on your tablet out of the box.
1) Before using the tablet for the first time, you must unlock the “Safety Lock” using the touch pen.
The “Safety Lock” is located on the bottom of the tablet.
2) Then press the On/Off button that is located on top of the device (note that you have to keep the
button depressed for about 1 second). If your tablet boots to Windows you may begin using
your tablet PC.
3) If your tablet does not boot initially, you will have to charge the battery by attaching the power
adaptor cable to the power connector at the bottom of the tablet. Attach the other end of the
power adaptor to an electrical wall socket.
After you attach the power adaptor, the tablet will automatically boot up with the Win CE desktop
appearing on the screen. You may begin using your tablet.
4) When not in use, simply press the on/off button on top of the tablet for 3 seconds to suspend
operations. The tablet Windows environment can be quickly revived by depressing the on/off
button again for at least 1 second.
Safety Lock
On/Off button