User's Manual

WF-100 CompactFlash Wireless LAN Card User Manual
                                                                                                                                        
                               
________________________________________________________________________
Page: 31
5.2 Status Tab
The
Status
tab of the utility window provides information of the wireless connection on the
current profile. Figure 1 shows the screen layout of the
Status tab.
Profile Name
Show the engaged profile name. Users may change the profile for different connection.
SSID
Short for
Service Set Identifier,
a unique identifier referred to as a Network Name of a
wireless network.
State
Display the current link state of the station.
l MAC address of the access point
— if connected, this column displays the MAC
address (BSSID) of the access point in
Access Point Mode
.
l Scanning
-- the station is searching for available access point of specified SSID in
Access Point Mode
. If disconnected, this column is always in this state.
l Associated
– the station is currently communicating with another station in the
Peer-to-Peer Mode
.
l Not Associated
– the station cannot detect any available station with the specified
SSID in the
Peer-to-Peer Mode
.