User's Manual

WF-100 CompactFlash Wireless LAN Card User Manual
                                                                                                                                        
                               
________________________________________________________________________
Page: 38
Channel
Select the transmission channel in
Peer-to-Peer
mode.
Power Saving Mode
Choice of the power saving. The power saving mode can reduce power usage by temporarily
disconnecting wireless connections when the connection is idle. The default setting is disabled.
RTS Threshold
Give the threshold of RTS. The RTS mechanism provides a solution to prevent data collisions.
But enabling RTS Threshold may cause redundant network overhead that could negatively
affect the throughput performance. When setting
Enable
, users may adjust the value from 0 to
3000.
Frag. Threshold
Give the threshold of Fragmentation. The fragmentation mechanism is for improving the
efficiency when high traffic flows along in the wireless network. If the device often transmits
large files in wireless network, users can enable the Fragmentation Threshold and the
mechanism will split the packet to send. When setting
Enable
, users may adjust the value from
256 to 2346.
Restore Defaults
Press this button to restore all settings by default into the current profile.