User's Manual

WF-100 CompactFlash Wireless LAN Card User Manual
                                                                                                                                        
                               
________________________________________________________________________
Page: 42
BSSID
Short for
Basic Service Set Identifier
, during the infrastructure mode, it represents the
MAC address of the access point.
Mode
Show the discovered device is an access point (AP) or a peer-to-peer (p2p) station.
WEP
Show whether the discovered device is WEP enabled.
Signal Level
Display the signal strength level of the discovered device.
Channel
Display the current communication channel used by the discovered device.
Connect
Users may press this button to make the station immediately connect to the selected device.
And the system will simultaneously change the profile to “Default” and update the content of
the
profile tab
to match such device’s settings.
Rescan
Press this button to scan again.