User's Manual

WF-100 CompactFlash Wireless LAN Card User Manual
                                                                                                                                        
                               
________________________________________________________________________
Page: 51
6.3 Profile Tab
The
Profile
tab provides users to configure a profile of wireless connection in preference.
Totally up to 9 different profiles can be added in the system. All settings in the
Profile
tab are
alterable. After filling the profile name and other settings, users may click
Apply
or
OK
button
to save the profile. Figure 2 shows the screen layout of the profile tab.
Profile Name
Give a name to the profile.
SSID
Short for
Service Set Identifier
, a 32-character unique identifier referred to as a Network
Name of a wireless network. The default value is “ANY”. This allows your wireless client to
automatically associate to any access point within the range of the station.
Mode
Select the wireless network mode. It can be
Access Point
or
Peer-to-Peer
Mode. The
default setting is
Access Point
.
Tx Rate
The transmission rate tells the speed of the transmission. It can be
1Mbps, 2Mbps, Auto 1 or
2Mbps, 5.5Mbps, 11Mbps
,
or Fully Automatic
. It is
Fully Automatic
by default.
Channel
Select the transmission channel in
Peer-to-Peer
mode.
Power Save