User's Manual

WF-100 CompactFlash Wireless LAN Card User Manual
                                                                                                                                        
                               
________________________________________________________________________
Page: 60
7. Hardware Technical Specification
Standard Compliance
IEEE 802.11b standard and WECA interoperability certified FCC part 15

sec.15.
247/USA
CE/ETSI 300.328

300.826/Eurpoe
TELEC/Japan
Electrical Specification
Parameter name Value Remark
Supply voltage range 3.0V~3.6V DC Bus powered
Average current: 290 mA typical 2% transmit, 98% receive
without power saving mode
AVERAGE CURRENT: 75 mA typical 2% transmit, 8% receive
90% standby with power saving
mode
Continuous transmit mode 300 mA max
Continuous receive mode: 290 mA max
Standby mode: 51 mA max with power saving mode
Form Factor
Comply with CompactFlash Type II Form Factor.
Connectivity Specification
Comply with the CompactFlash Standard release 2.0