Manualshelf

User's Manual

ManualsBrandsQuanta Computer ManualsComputers & AccessoriesMini-PCI Wireless LAN card in Notebook Computer
11121314151617181920
UANTA COMPUTER INC.
WM1 Mini-PCI User Manual
______________________________________________________________________________
_______
________________________________________________________________________
WM1
User Manual Rev. 1A Page: 12
- Quanta Confidential -
Profile Name
The name of the profile currently in use.
Basic
SSID
The name of the SSID (Service Set Identification) associated with the profile
State
This field is used to display the current state of the driver. When the state “associated” means
normal flow of operation in access point or peer-to-peer devices. During access point
connection, it will represent the MAC address of the access point. And during an Ad-Hoc
connection, it will read the MAC address of the peer-to-peer devices. A state of “scanning”
means that the node is searching for available access point and can not detect any wireless
device within range.
Mode
It will be shown the access point or peer-to-peer in this field.
Access point – This mode of operation requires the presence of an access point. All
communication is done via the access point, which relays packets to other wireless clients in
the BSS as well as to nodes on a wired network such as Ethernet.
Peer-to-peer – This is the peer-to-peer mode of operation. All communication is done from
client to client without the use of an access point.
Current Tx Rate
It will shown the transmit rate is being currently used for an active connection. This value has
no meaning when state is “scanning”
Current Channel
Channel being used, if any, for this wireless connection. It will shown the communication
channel ranging from 1 to 11.
Power Saving Mode
Indicates of power saving mode is enable or disable. Power saving mode reduced energy
usage by temporarily disconnecting wireless connections when the connection is idle.
Rescan
Pressing the rescan button causes the driver to restart and begin its connection procedure. The
connection procedure differs depending on the mode of the driver.
Advance
RTS Threshold
Indicated of RTS threshold is disable or the value ranging from 0 to 2432.
Frag Threshold
Indicated of frag threshold is disable or the value ranging from 256 to 2432.
Beacon Interval
Indicated of beacon interval is disable or the ranging from 20 to 1000.