User's Manual
UANTA COMPUTER INC.
WM1 Mini-PCI User Manual
______________________________________________________________________________
_______
________________________________________________________________________
WM1
User Manual Rev. 1A Page: 16
- Quanta Confidential -
WEP security is used.
WEP Key
You can use “Create Key Manually” or “Create Keys with Pass-phrase
”
method to enter
encryption keys. It allows the entry of four keys for 64-bit encryption and one set of 128-bit
key according to WEP function select. To be written to the driver and registry, each key must
consists of correct digits and letters. The detailed descriptions will be shown as below for
these two kinds of methods:
Create Key Manually
For 40-bits encryption:
- Five alphanumeric characters in the range of “a-z”, “A-Z” and “0-9”. (e.g. MyKey)
- 10 digit hexadecimal values in the range of “A-F” and “0-9”. (e.g. 11AA22BB33).
For 128-bits encryption:
- 13 alphanumeric characters in the range of “a-z”, “A-Z” and “0-9”. (e.g. WEPencryption).
- 26 digit hexadecimal values in the range of “A-F” and “0-9”. (e.g.
11AA22BB33123456789ABCDEFF)
.
Create Keys with Pass-phrase
A Pass-phrase can be entered which is used as a “seed” to randomly generate the four keys.
This saves considerable time since the same keys must be entered into each node on the
wireless network.
Key1, Key2, Key3, Key4
These four fields can be used to manually enter the keys. This may be necessary if you wish
this node to match keys in a different vendor product. These fields also display the keys when
they are generated using a Pass-phrase.
Use WEP key
This field updates the driver with the four keys displayed in Key1 through Key4. These keys
are also written to the registry for permanent storage. For 128 bit encryption, this field will be
invisible.
About Tab
The
about
tab is used to show Frequency Domain, Wireless Client management Utility
version, Serial Number and MAC Address of this Network Interface Card, Network Interface
Card Driver version and Network Interface Card firmware version. Users need to use these
version numbers when reporting their problems to technique support.