User's Guide

Rev. 1.1 Alereon Confidential 9
User’s Guide Certified Wireless USB Host & Certified Wireless USB Hub Software Installation
You should see the following window now stating that the association with the wireless hub was
successful. Select OK.
Figure 14. Association Successful
Once association is successful and the HOST LED on the wireless hub has stopped flashing, you may
unplug the USB cable from the wireless hub and the following popup will show up above your system
tray. A solid LED Host light on the hub will indicate that the wireless link has been established.
At this point, a found new hardware window will appear in the system tray and the final driver will be
installed automatically for the Wireless USB hub. Remember that if the Found New Hardware Wizard
window appears, follow the steps highlighted in the previous section.
Figure 15. Ready-to-use Popup