User's Manual

1.3 Receiver Path
This Mini card module has a wide dynamic range, direct conversion receiver.
It employs high-order on-chip channel filtering to ensure reliable operation
in the noisy 2.4-GHz ISM band. The excellent noise figure of the receiver
makes an external LNA unnecessary.
1.4 Transmitter Path
This Mini card module includes a linear transmitter capable of delivering up
to +15 dBm while meeting the IEEE802.11g specification. The output power
is adjustable in 1-dB steps, down to 0 dBm. Base-band data is
up-converted directly to the 2.4-GHz ISM band.
1.5 Calibration
This Mini card module enables the device to be used in high-volume
applications because calibration routines are not required during
manufacturing test. These calibration routines are performed periodically
in the course of normal radio operation.
Chapter 2 Installation Driver
2.1 Driver Features
 IEEE 802.11b/g
 Ad-Hoc / Infrastructure
 WEP 64 / 128-bit
 WPA-PSK / WPA2-PSK (by WZC / Funk Client)
 WPA / WPA2 (by WZC / Func Client)
 802.1x – TLS / 802.1x – PEAP (by WZC / Funk Client)
 LEAP (by Funk Client)
 WPA-TTLS (by Funk Client)