User Manual Part 1

Quanta Computer Inc. IEEE802.16e WiMAX IAD (WV202)

User Manual

211, Wen Hwa 2nd Rd., Kuei Shan Hsiang, CONFIDENTIAL

Tao Yuan Shien, Taiwan, R.O.C. Classification: proprietary information

http://www.quantatw.com

The WiMAX IAD is configured with the default IP address of 192.168.1.254 and subnet mask of

255.255.255.0. Considering that the DHCP server is enabled by default, the DHCP clients should be

able to access the WiMAX, or the host PC should be assigned an static IP address first for initial

configuration. An example for static IP address can be set to “192.168.1.100”.

You also can manage the WiMAX IAD through a web browser-based manager. The WiMAX IAD

manager uses the HTTP protocol via a web browser to allow you to set up and manage the device. The

URL of management web site is : http://192.168.1.254. Following are the steps to login and control the

IAD.

Step 1: Power on IAD, when the booting is finished, the LED stats of IAD is as below:

LED is always “ON”: “Power”, “FXS1”, “FXA2”

LED is always “OFF”: “WiMAX”, “LAN1”, “LAN2”, “System”

Step 2: Connect the network adapter of the PC to the LAN1 port on IAD.

Step 3: Make sure the PC’s IP address getting from IAD DHCP server is 192.168.1.xxx. The default IP

address is 192.168.1.100 for the first requested client.

Step 4: Open the browser and input the web control site: http://192.168.1.254

and input the login

username and password: root/root, then click the “Login” button