User Manual Part 1

Quanta Computer Inc. IEEE802.16e WiMAX IAD (WV202)
User Manual
211, Wen Hwa 2nd Rd., Kuei Shan Hsiang, CONFIDENTIAL
Tao Yuan Shien, Taiwan, R.O.C. Classification: proprietary information
http://www.quantatw.com
16
3.1 WAN
In WV202, the WAN is the WiMAX connection entry. There are two pages (WAN Setting and WiMAX
Setting) to setting the TCP/IP settings and WiMAX frequency and bandwidth settings. The IAD is not yet
supported the bridge mode for WAN.
This chapter is going to introduce the function of each connection mode and the basic configuring steps
that you have to do. If you do not follow the configuring steps for using these connection modes, you
might get some connection problems and cannot connect to the Internet well.
3.1.1 WAN Setting
In this page, you can set the values about TCP/IP information like as IP address, MAC address, host
name, MTU, MRU, and DNS server.
¾ Router / Bridge Mode
In this version it is just supported the “Router” mode to work as a gateway/router.
¾ Host Name
The Host Name field is optional but may be required by some Internet Service Providers. The default host
name is wimax.quantatw.com. It is a computer that is connected to a TCP/IP network, including the
Internet. Each host has a unique IP address. Assign the domain name or IP address of your host computer.
When the host operating system is set up it is given a name. This name may reflect the prime use of the
computer. For example, a host computer that is a web server may be called www.xxx.com. When we need
to find the host name from an IP address we send a request to the host using its IP address. The host will
respond with its host name.