User Manual Part 1

Quanta Computer Inc. IEEE802.16e WiMAX IAD (WV202)
User Manual
211, Wen Hwa 2nd Rd., Kuei Shan Hsiang, CONFIDENTIAL
Tao Yuan Shien, Taiwan, R.O.C. Classification: proprietary information
http://www.quantatw.com
25
3.2 Auto Connect
The Auto connect function will let IAD auto connect to WiMAX BS after booting up. There are some
rules when you enable and disable this function.
 If the Auto Connect button is “On”, WiMAX will try to connect with BS automatically.
 The default value of Auto Connect setting is “On”, if you rescan BS and connect to BS manual,
the setting will be changed to “Off”.
 If the BSID list is by “History”, WiMAX IAD will connect to those BSs in the History list
firstly.
 If several BSID entries in the history list, WiMAX IAD will connect to the BS which has the
best CINR.
 The BS will be auto added in the history list after IAD has connected to the BS.
 You can manual add BS in the predefine list and factory list by enable “Predefine” and
“Factory” function in the “Depends on which BSID List” field. See as below figure.
Field Description Default value
BSID Input the BS’s BSID provided by ISP
Frequency Input the BS’s frequency provided by ISP
Mask Input the BS’s mask provided by ISP
Change Click this button to change the data of existed BS
Add Click this button to add the data of BS