User Manual Part 1

Quanta Computer Inc. IEEE802.16e WiMAX IAD (WV202)
User Manual
211, Wen Hwa 2nd Rd., Kuei Shan Hsiang, CONFIDENTIAL
Tao Yuan Shien, Taiwan, R.O.C. Classification: proprietary information
http://www.quantatw.com
31
3.5 DHCP
3.5.1 DHCP Server
DHCP stands for Dynamic Host Control Protocol. The DHCP server gives out IP addresses when a device
is starting up and request an IP address to be logged on to the network. The device must be set as a DHCP
client to "Obtain the IP address automatically". By default, the DHCP Server is enabled in the unit. The
DHCP address pool contains the range of the IP address that will automatically be assigned to the clients
on the network.
DHCP client computers connected to the unit will have their information displayed in the DHCP Client
List table. The table will show the Type, Host Name, IP Address, MAC Address, Description, and Expired
Time of the DHCP lease for each client computer.
Field Description Default value
DHCP Server Enable or Disable the DHCP server to dynamic release IP to
the connected client in LAN.
Enable
Assigned DHCP
IP Address
Enter the starting IP address for the DHCP server’s IP
assignment and the ending IP address for the DHCP server’s
IP assignment.
Start IP: 192.168.1.100
End IP: 192.168.1.250
DHCP IP Lease
Time
Assign the length of time for the IP lease, default setting is
86400 seconds.
86400
MAC Input the MAC address of the client which you want to add.
IP Input the IP address of the client which you want to add.
Description Input the description of the client which you want to add.
Change Click “Change” button to change the data for existed map.
Add Click “Add” button to add the DHCP static mapping data.