User Manual Part 1

Quanta Computer Inc. IEEE802.16e WiMAX IAD (WV202)
User Manual
211, Wen Hwa 2nd Rd., Kuei Shan Hsiang, CONFIDENTIAL
Tao Yuan Shien, Taiwan, R.O.C. Classification: proprietary information
http://www.quantatw.com
48
Media Port Start The starting range of port for RTP. Port number for initial
of sending RTP packet. Its range is 1024 to 65535,
default setting is 5000.
5000
Media Port End The ending range of port for RTP. Its range is 1024 to
65535, default setting is 5009
5009
Transport Assigns the default SIP transport protocol.
UDP – UDP (User Datagram Protocol) provides very few
error recovery services, offering instead a direct way to
send and receive datagram over an IP network. It's used
primarily for broadcasting messages over a network.
Here the UDP is a default setting.
TCP (Transmission Control Protocol) guarantees delivery
of data and also guarantees that packets will be delivered
in the same order in which they were sent.
UDP
SIP Time Interval SIP time interval in milliseconds. The default setting is
500 msec.
500
Timeout for Invite INVITE message timeout value. Assigns a value 1 to
100, default setting is 12 seconds. It denotes if an
INVITE request was sent, and a response is not received
from the remote site within the allotted time (the value of
Invite Timeout). The present request will be dropped and
a new connection request will be initiated.
12
Timeout for Ring
Back
Timeout value for dropping a call after receiving 180
responses. Ring back is an intermittent audio tone that a
caller in a telephone system hears after dialing a number,
when the distant end of the circuit is receiving a ringing
signal. It can be generated by the servicing switch of
either the called party or the calling party. It is not
generated by the called instrument. The default setting is
180 seconds.
180
Timeout for
Release
BYE message timeout value. Assigns a time interval 1 to
10, default setting is 4 seconds.
4
Registration Retry
Count
When the SIP registration is failed, it will retries to
registry again after the Registration Retry Interval time.
You can set how many times to retry SIP registration.
The default setting is the maximum number ‘65535’.
65535
Registration Retry
Interval
The interval time to retry SIP registration. The default
setting is 30 seconds.
30
Ping Interval It is the interval time to execute ping the SIP server. 0
PRACK Flag Indicates if INVITE messages sent on the specified trunk
group require reliable provisional responses. This is used
to deliver provisional responses (like alerting) reliably
and is useful for SIP trunks. The default setting is
disabled.
Disable
SIP User Agent
Name
The name of the SIP User Agent. VOIP_Agent_001