User Manual Part 1

Quanta Computer Inc. IEEE802.16e WiMAX IAD (WV202)
User Manual
211, Wen Hwa 2nd Rd., Kuei Shan Hsiang, CONFIDENTIAL
Tao Yuan Shien, Taiwan, R.O.C. Classification: proprietary information
http://www.quantatw.com
51
Message Waiting Indication (MWI) enables your phone to give you a message-waiting (beeping) dial
tone when you have one or more voice messages.
P-asserted header is used when you want to send some extra number other than calling, called. Assume the
SIP Invite request is with numbers, and the Call agent wants to out pulse charge number. It does that in the
P-asserted header. The P-Asserted-Identity header is used among trusted SIP entities (typically
intermediaries) to carry the identity of the user sending a SIP message as it was verified by authentication.
Field Description Default value
(Line1 / Line2)
MWI Subscribe Message Waiting Indication (MWI)
To disable / enable the function for the VoIP phone to
ask for MWI (Message Waiting Indication) periodically.
Disable / Disable
MWI User Name The username for MWI.
MWI
Authentication User
Name
User name for authentication. Maximum 36 characters
MWI
Authentication
Password
User password for authentication. Maximum 24
characters.
MWI Confirmed
Password
Enter the password again, this is used to confirm user
password for authentication. Maximum 24 characters.
MWI Refresh
Timeout
The time to refresh MWI, it will stops to refresh MWI
when the message-waiting time is over this time setting.
The default setting is 3600 seconds.
3600 / 3600
Field Description Default value
(Line1 / Line2)
P-Asserted To disable / enable the P-Asserted function, the default
setting is disabled.
Disable / Disable
Asserted Identity
Username
The name of asserted identity. 2301 / 2300
Asserted Identity
Displayname
This text message will be sent between the callee and
caller and will show on LCD panel for general using.
2301 / 2300