User Manual Part 1

Quanta Computer Inc. IEEE802.16e WiMAX IAD (WV202)
User Manual
211, Wen Hwa 2nd Rd., Kuei Shan Hsiang, CONFIDENTIAL
Tao Yuan Shien, Taiwan, R.O.C. Classification: proprietary information
http://www.quantatw.com
55
5. VoIP Settings
The VoIP setting contains the following items:
¾ Voice Setting
¾ Tone Setting
¾ Call Service
¾ FXS Port
¾ FAX Setting
¾ General Dialing
¾ Phone Book
¾ Call Screen
5.1 Voice Setting
The parameters in “Voice Setting” will be worked in all FXS port (FXS1 and FXS2), like as the
payload type value in different codec and RTP settings. And some parameters can be set to different values
in line1 (FXS1) and line2 (FXS2), like as setting different priority of different codec, DTMF settings, and
Tx/Rx gain value in all lines (Line1 and Line2).
RTP provides end-to-end network transport functions suitable for applications transmitting real-time data,
such as audio, video or simulation data, over multicast or unicast network services. RTP does not address
resource reservation and does not guarantee quality-of-service for real-time services. The data transport is
augmented by a control protocol (RTCP) to allow monitoring of the data delivery in a manner scalable to
large multicast networks, and to provide minimal control and identification functionality. RTP and RTCP
are designed to be independent of the underlying transport and network layers. The protocol supports the
use of RTP-level translators and mixers.