User Manual Part 2

Quanta Computer Inc. IEEE802.16e WiMAX IAD (WV202)

User Manual

211, Wen Hwa 2nd Rd., Kuei Shan Hsiang, CONFIDENTIAL

Tao Yuan Shien, Taiwan, R.O.C. Classification: proprietary information

http://www.quantatw.com

5.3.1 Call Service for All Line

It is a feature on telephone network. If a calling party places a call to a called party which is otherwise

engaged, and the called party has the call waiting feature enabled, the called party is able to suspend the

current telephone call and switch to the new incoming call, and can then negotiate with the new or the

current caller an appropriate time to ring back if the message is important, or to quickly handle a separate

incoming call.

Field Description Default value

Call Waiting Disabled / Enabled the call waiting function

Enable

Call Waiting Timeout

Assign the time interval from 10 to 300. Default setting is 30

seconds. If set the value to 300, it will has no timeout limit.

Call Hunting Group

A hunt group is a grouping of telephone lines (usually incoming)

that are set up to receive calls in a particular order if a line is busy.

For example:

Line 1 - First in hunt group

Line 2 - Second in hunt group

If line 1 is busy and a call comes in, then that call will be routed to

line 2, depending on the time interval you specified in Call

Hunting Timeout field.

a. If both lines 1 and 2 are busy, then reply a busy tone to the

caller.

b. If both lines are available and no one pick up the call, the

hunting sequence will be Line 1 → Line 2 → Line 1…looping

until anyone pick-up the call or the caller hang-up.

Select the port number to join the hunting group:

a. FXS Port 0: The phone line plug in ATA Line 1 port.

b. FXS Port 1: The phone line plug in ATA Line 2 port.

Call Hunting Timeout Time interval for routing the incoming call in the group

Call Repeat Activity

Time

If the number you are calling is busy and there is no Call Waiting

feature. The Repeat Call service allows you to connect to a busy

number which is become free.

Repeat Call will automatically attempt to place the call in the

specified activity time.

1800