User Manual Part 2

Quanta Computer Inc. IEEE802.16e WiMAX IAD (WV202)
User Manual
211, Wen Hwa 2nd Rd., Kuei Shan Hsiang, CONFIDENTIAL
Tao Yuan Shien, Taiwan, R.O.C. Classification: proprietary information
http://www.quantatw.com
63
5.3.2 Call Service for Per Line
Field Description Default value
Line1 / Line2
Call Transfer Option Indicates whether the remote end is allowed to transfer the call to a
third party. There are two types: Restricted and Allowed
Allowed /
Allowed
Call forward Option Indicates whether the remote end is allowed to forward the call to a
third party. There are two types: Restricted, and Allowed.
Allowed /
Allowed
Call Forward Always
URI
Assigns a phone number; if you want all incoming calls of the port
always be redirected.
Call Forward on Busy
URI
Assigns a phone number. When the port is busy, the incoming call will
be redirected to the specified phone number.
Call Forward on
NoAnswer URI
Assigns a phone number. When the port is no answer, the incoming
call will be redirected to the specified phone number.
Call Forward on
NoAnswer Timeout
When the phone is ring a long time, the incoming call will timeout
and redirected to the specified phone number that is fill in “Call
Forward on NoAnswer URI”. Default setting is 180 seconds.
30 /
30
Do Not Disturb Enable/Disable the do not disturb function.
Disabled /
Disabled
Hot Line Hot Line provides a way for a user to call a designated phone number
without dialing any number. Once the user picks up the handset of the
station which is setup as a “Hot Line”, the system will automatically
dial the pre-set number and connect the caller to the pre-set place.
For example, assuming that the station number 101 in the factory is
set as hotline to Warehouse “A”.
The Hot Line service let you make call to designate number directly
Disabled /
Disabled
Hot Line URI Input the URI value for hot line.