User Manual Part 2

Quanta Computer Inc. IEEE802.16e WiMAX IAD (WV202)
User Manual
211, Wen Hwa 2nd Rd., Kuei Shan Hsiang, CONFIDENTIAL
Tao Yuan Shien, Taiwan, R.O.C. Classification: proprietary information
http://www.quantatw.com
66
Field Description Default value
Caller ID Type Select a type from the pull-down menu to suit the standard of different
area. The Caller ID is usually involved in telecommunication
equipment. Consult your telecommunication service providers before
configure this parameter.
FSK ETSI
Caller ID Type 2 Select a type from the pull-down menu to suit the standard of different
area. The Caller ID is usually involved in telecommunication
equipment. Consult your telecommunication service providers before
configure this parameter.
FSK ETSI
Caller ID Power
Level
Assign the Caller ID Power Lever from 0 to 100.
10
Caller ID Display There are two types to display the caller information on the screen.
Before Ring, the caller id information is displayed before first ring.
After Ring, the caller id information is displayed between first ring
and second ring. Default setting is Before Ring.
Before Ring
Caller ID Type 1
Alerting Signal
Type 1 alerting signal is used to detect CID when device is
ON-HOOK. Default setting is No Alert.
a. DTAS = Dual Tone Alert Signal
b. RPAS = Ring Pulse Alert Signal
c. LR = Line Reversal
d. LR-DTAS = Line Reversal + Dual Tone Alert Signal
DTAS
Caller ID Type 2
Alerting Signal
Type 2 alerting signal is used to detect CID when device is
OFF-HOOK. Default setting is No Alert.
a. DTAS = Dual Tone Alert Signal
b. RPAS = Ring Pulse Alert Signal
c. LR = Line Reversal
d. LR-DTAS = Line Reversal + Dual Tone Alert Signal
DTAS
Caller ID
Replacement Flag
Enabled / Disabled to replace the caller ID when caller ID length is
greater than 7 bytes.
Disabled
Caller ID
Replacement Prefix
Replace the caller ID with the Prefix string.
Caller ID
Replacement String
Replace the caller ID with the specify string.