User Manual Part 2

Quanta Computer Inc. IEEE802.16e WiMAX IAD (WV202)
User Manual
211, Wen Hwa 2nd Rd., Kuei Shan Hsiang, CONFIDENTIAL
Tao Yuan Shien, Taiwan, R.O.C. Classification: proprietary information
http://www.quantatw.com
67
5.4.2 FXS Port Setting for Per Line
Table 1 Receive/Transmit Voice Gain Value
Level Decibel
1 -24dB
2 -18dB
3 -12dB
4 -6dB
5 -2.5dB
6 0dB (default setting)
7 3.5dB
8 6db
Field Description Default value
Line1 / Line2
Dial Method There are two methods for dialing. FTMF only or PULSE only DTMF only /
DTMF only
Ring Impedance This IAD support 8 type of Ring Impedance. Select a type from the
pull-down menu.
600ohm /
600ohm
Hook Flash Detect
Upper Bound
Hook-flash indicates the condition when a request for voice
conference and is recognized as a quick off-hook/on-hook/off-hook
cycle. The maximum time to detect hook flash
600 /
600
Hook flash detect
Lower Bound
The minimum time to detect hook flash
100 /
100
Voice Tx Level Sets a specific sound intensity for transmitting sound. Select a level
from 1 to 8, default setting is 6. Table 1 lists the receive/transmit voice
gain value for reference. The “gain” means increase in the power of
electrical signal, measures by decibel.
6 /
6
Voice Rx Level Sets a specific sound intensity for receiving sound. Select a level from
1 to 8, default setting is 6. Table 1 lists the receive/transmit voice gain
value for reference. The “gain” means increase in the power of
electrical signal, measures by decibel.
6 /
6