User's Manual
Table Of Contents
Quanta Microsystems, Inc.
Subject:
ZM100 operation manual-RF mode
Rev: 0.1
Doc No.
OP_ZM100-1
Revised Date:
2007/05/16 Page: 3 of 9
QMI PROPERTY & CONFIDENTIAL!
3
1. Adaptor board connection and setup
Power IN (+3.3Vdc)
USB plug in:
― J_USB should be selected as USB PWR IN mode
― USB +5V Æ LDOÆ+3.3V
RCA Jack plug in:
― J_USB should be opeded
― Use a +3.3V(inner) DC adaptor plug in CON_RCA
Pin header plug in:
― Use other power source(such as power supply)
― Supply +3.3V and plug in by J_RCA pin header
Fig1.1 Adaptor board and DUT test setup